Features
Everything the farm sees, in one place
From the sensor in the furrow to the irrigation decision.
Crop-adapted soil monitoring
We measure at 30 cm at every station and at 60 cm on the deep stations (on every parcel, on both plans), so you see both the layer that dries first and the reserve beneath it; for maize, wheat, durum wheat, rye, barley, rapeseed, soybean and sorghum on irrigated parcels, the Pro plan can add a third probe at about 90 cm. Every probe also measures salt in the soil (conductivity); on irrigated parcels, salty soils and salt-sensitive crops, the Pro plan gives you alerts and advice on it. The 'too dry' and 'too wet' thresholds are computed for your soil type, not from one-size-fits-all numbers that can mislead you. And after a few heavy rains or waterings, the app measures field capacity at each probe itself and fits its thresholds to your own soil.
Irrigation planner
Every day we work out the soil water balance with the FAO-56 method — the international standard for crops' water needs. We account for how much water the crop loses through evaporation (measured by the weather station in the field), how much it uses at its current growth stage, and how much rain the forecast expects. The result: when to irrigate, how much, and on which parcel. For maize, irrigation is recommended by the University of Nebraska's stage-by-stage strategy: at 70% of usable water used until about two weeks before tasselling, at 35% from then to the dough stage, and at 60% after that. Once the soil holds enough to reach maturity, no more irrigation is recommended. Drought stress and the yield estimate still use the FAO-56 stress line, for maize too, and every other crop is still irrigated at that line. On every parcel you see the soil water by depth and how many days the crop has left before stress (for maize, before irrigation). On Pro you also compare water across parcels and get water reports.
Alarms and notifications
Over 30 alarm types, classified into three severity tiers (critical / major / warning) and sent by e-mail and as phone notifications in Romanian: from deep drought and waterlogging to stage-aware frost and heat, strong wind, disease risk, salinity, irrigation need, low batteries and sensors that stopped reporting. With configurable quiet hours, so the soil doesn't call you at 3 a.m.
Parcel map
Each parcel coloured by the real state of its soil water. When a parcel has several sensor nests you see the average of fresh readings, while the parcel's status follows its driest point; from five stations up, its driest ten percent, so one faulty probe cannot raise an alarm for the whole parcel. On the map you can switch on extra layers: a rain radar and satellite maps that show where the crop is growing more weakly (NDVI · Pro). The map also shows the official weather warnings (ANM) and the physical blocks (APIA), where coverage exists.
Weather and ET₀
A weather station right next to your parcels: temperature, humidity, wind and rain. From those we also work out how much water the crop loses through evaporation, when dew forms and how hot it really feels. The daily forecast feeds straight into the irrigation plan. Official weather warnings (ANM) sit next to the forecast, and a 48-hour chart shows the weather hour by hour.
Installable phone app
The platform is a progressive web app (PWA): install it on your phone like a native app; it opens instantly, even without signal, and new data loads when you reconnect.
Growth stages, based on your hybrid
Track each parcel's growth stage — maize, wheat, durum wheat, barley, rye, rapeseed, sunflower, soybean, sorghum, field pea or sugar beet. For maize, sunflower, rapeseed, soybean, wheat, barley, rye and sorghum you can pick the exact variety or hybrid you sowed (Pioneer, LG, Syngenta and other hybrids grown across Romania), so the season length comes from its own characteristics rather than a broad maturity band. Stages are worked out from the heat accumulated in the field (growing degree days), so they follow how the weather actually goes. You also get a few pointers for your hybrid — the right herbicide window, disease and pest resistance, recommended plant density. We also show whether it is time to sow, from the crop's usual sowing window and the soil temperature your probes measure. The irrigation plan adjusts to the current stage, and the history shows how the season went.
Hardware planner
Enter your parcels, crops, soil type and terrain, and the platform works out the equipment you need: how many soil stations and at which depths, the base station that gathers the field data (gateway) and the weather station — and estimates the monthly subscription, before any commitment. After installation you sign the contract online, in the app.
All your parcels, one map
Even when your parcels lie in several villages, you see them on one map, each with its status, and open any of them directly.
Alerts your way
Each user chooses which alarm types arrive by e-mail and as phone notifications — drought, waterlogging, heat, wind, offline sensors, low batteries — with settings saved to the account, not the browser.
Reports and yield estimatePro
You get a report for every parcel, monthly and at season end, also by e-mail as a PDF: how it did on water, how much you produced (estimated), how it compares with past years and what the harvest is worth at the regional silo price. You also see the yield estimate during the season, on every parcel. On irrigated parcels we also factor in how much the salt in the soil mattered. The estimate accounts for water and, for maize, soybean and sunflower, heat (for sunflower and wheat, late in the season, also the state of the crops seen from satellite) — not disease, hail or lack of nitrogen — so it is a solid guide for decisions, with a ±20–30% margin, not a promise. (It is built on the international FAO-56, FAO-33 and FAO-29 methods; for sunflower, on our own model, which follows the water and the heat in each stage of the crop.)
Satellite maps: crop vigour and canopy waterPro
Satellite imagery (Sentinel-2) laid over your parcels shows where the crop grows well and where it is weaker, with four indices: the classic vegetation index (NDVI), one more robust over dense canopy and less affected by bare soil (EVI2), one sensitive to chlorophyll once the canopy has closed (NDRE) and one for the water in the leaves (NDMI). Spot the trouble patches before you notice them from the tractor and tie them to soil moisture and the irrigation plan.
Early warningsPro
Beyond the soil thresholds, the platform watches the weather and the crop's stage and warns you ahead: frost or heat risk right at the sensitive stage of the crop, drought in the forecast, strong wind on the way, fungal disease risk, and the right window to spray. It alerts you before, not after.
Harvest value at the silo pricePro
The reports value your harvest at the silo price in your region, with the price's source and date, and show how that price moved over the last three months, for the crops you grow.
Harvest outlookPro
Once the crop reaches maturity, we follow how the grain dries with the weather in your field and tell you the day it reaches harvest moisture, for every grain crop. For maize you pick the target: 25% if you have a dryer, 22, 20 or 18% if you sell to the silo and pay for drying; the app also shows how many days until the next step down. The harvest week is checked against the official weather warnings.
Second crop and rotationPro
After harvest we tell you what still fits on the parcel the same year, from the heat, water and frost risk left. The campaign calendar checks the rotation: minimum breaks between crops, diseases that stay in the soil and each crop's share.
Climate trends
See how the season compares with the 1996–2025 normal at the nearest reference weather station: the drought index (SPEI) tells you whether it is an ordinary year or a dry one, not just a dry month.
What's next and the field journal
Each parcel lists the work coming up for the stage the crop is in. You log waterings, treatments, fertiliser and the harvest in the parcel's field journal, from your phone, and the recorded harvest goes into the campaign history. Fertiliser entries build the fertiliser register, ready to print, with nitrogen per hectare and yearly totals.
Salt from irrigation waterPro
Tell us where the water comes from (river, canal or well), how salty it is and whether groundwater is close. From waterings, rain and the water that passes below the roots we work out where the soil salt settles over time against the crop’s threshold, and how much extra water washes it out. No lab tests: it all starts from the water, not the probe.
Maize nitrogen planPro
We tell you how many kg of nitrogen per hectare your maize needs for the season, within the legal limit, and when to apply them, with the fertiliser amounts. The calculation follows the University of Nebraska method and uses the yield you expect, if you enter it in the parcel settings. The plan also counts the chemical fertiliser recorded in the journal: the doses still to come adjust to what you have already applied.
Dry-winter warningPro
In early March we tell you whether the winter left the soil dry: the water in the top metre of soil at the end of February, against every winter since 1981. If the winter is in the driest third, we let you know once, for maize, sunflower and rapeseed, and, where your county has enough years of data for your crop, show you how often a poor year followed. For maize and sunflower you know before sowing. In early summer we look from the satellite at how green the crops in your county were at the end of May (and of June, for sunflower) and, if they are in the least green third of the years since 2001, we e-mail you that the satellite confirms the drought.
See the platform with your data
Book a 30-minute demo, or step into the live demo with sample data on your own.